The Saddle Stitch Binding method is the second most common method used in commercial bookbinding. As compared to the Perfect Binding method, the Saddle Stitch Bookbinding method is also fast and perhaps even more cost effective. It only requires several staple bullets to bind a book.
The downside for the commercial Saddle Stitch Binding method is that the thickness of a Saddle Stitch bound book is limited to the strength and length of a staple bullet. Hence, these books are usually thinner compared to Perfect Bound books. They are made of folded paper and thus have a small spine. As it is relatively easier to place a staple bullet through softer paper compared to thick cardboards, these books usually comes with a soft book cover.
Some examples of commercially available Saddle Stitch Bound books include the school exercise books that many school children use:
Do-It-Yourself Guide To Saddle Stitch Binding
Saddle Stitch Binding is a fast and easy way to make beautiful notebooks that will definitely impress your friends. Simply grab a beautiful image off Google, print it out onto a paper for a beautiful cover page. If you’d like a notebook containing pages with lines, purchase some lined paper that can be found in most stationary stores (Popular bookstore has some of them).
Estimated Duration for Saddle Stitch Binding Project
2 – 3 hours, depending on thickness of your book.
Materials and Tools
(Click for Full Size Image)
- 5 pieces of A4 Paper or 10 pieces of A5 Paper
- 1 Piece of A4 colored / decorative paper or 1 Piece of Extra Heavy Weight Paper (thicker paper)
- Cutting Mat
- Awl or Hole Puncher
- Thread (Linen is recommended)
- Wax (Bee’s Wax or Candle)
- 2 Clips
Explore your bookbinding options with our Bookbinding Essential Kits.
Creating Your Saddle Stitch Bound Book
I. Preparing Your Book Pages
1. Gather your paper into a stack.
2. Place your book cover on top of the stack (facing out).
3. Make sure the paper are aligned.
4. Hold the paper in place using the clips.
II. Creating Your Book Spine
1. Using a Ruler, draw a line that splits the book into 2 equal halves (across the underside of the book).
2. Mark 5 spots separated by equal distance along the line. – these spots will be used for sewing later on.
3. Use your Awl and make holes on the 5 spots you have marked out
III. Binding Your Book
We will start the sewing process from the middle hole in this Saddle Stitch Bookbinding tutorial.
1. Wax the thread slightly and put the thread through a needle.
2. Start sewing from the inside of the book (the side where you will write on), from the middle hole.
3. Bring your needle across the hole and pull the thread through.
4. Leave a small length of thread behind. (do NOT pull the entire thread through the hole 0.0)
5. Bring your needle to the hole to the right and pull the thread through.
6. Continue onto the next hole (on the right) before U-turning and coming back to the middle hole.
7. Repeat until your thread has gone through all the holes.
8. The sewing should end at the middle hole (where you started from).
9. Your thread should now be along the outer side of your book. Tie a knot this way:
10. Bring your needle to the inner side of the book via the hole you started from, pulling the knot that you have just created in too.
11.End with the thread on the inside of the book. Tie a double knot:
10. Cut off all excess thread.
IV. Completing Your Book
Once done with the sewing, you should have a stack of paper that is bound together in the middle by a thread. To complete your book,
1. Start folding your book along the thread
2. Trim off the flipping side of the book if you want a straight edge on all sides of your book
Remember, the saddle stitch binding is only suitable for thin books. Trying to bind a thick book with this method results in a book that cannot be folded flat.
Learn To Create Your Own Handmade Book Right At Home With Our Free Bookbinding Video Course. Click Here To Enroll